Witchy Ghost on Broomstick Heat Transfer – Halloween Iron-On DIY

Witchy Ghost on Broomstick – Heat Transfer 

Fly into Halloween fun with this magical design! 👻✨🧹 This adorable ghost is dressed in a pointed witch hat, holding a pumpkin trick-or-treat bucket while flying on a broomstick. A whimsical and spooky-cute transfer that’s perfect for your seasonal DIY projects.

• Design: Ghost flying on broomstick with witch hat & pumpkin 🎃🧹👻

• Approx. Size: 3.5in x 3.5in

• Application: Heat press recommended for best results

• Perfect For: T-shirts, hoodies, tote bags, trick-or-treat bags, and Halloween crafts

Add a little witchy magic to your Halloween creations! 

HOW TO APPLY:

Home-Iron:

1 Protect surface your ironing on with a heat mat or towel etc

2 Place your t-shirt or fabric into place and iron for 5 seconds to remove creases

3 Place your DTF Image Transfer into position

4 Turn off your steam function, empty water from iron. Set Iron to Cotton 130-150°C

5 Iron with firm pressure for 10-15 seconds

6 Wait until the transfer is cool and slowly peel off the clear film

7 If the transfer is not fully adhered then please repeat step 5 - Make sure you re-place the clear film.

Heat Press:

1 Heat press at 160c (Celsius) for 30 seconds.

2 Allow to cool for 90 seconds.

3 Peel the DTF PET film to reveal the transfer.

4 Apply a DTF finishing sheet over the transfer.

5 Heat press again at 160c (Celsius) for 10 seconds to finish.